Professional Tips and Tricks for Installing a New Shower Unit

Get An Estimate

Just how do you feel on the subject of How to Install a Direct-to-Stud Shower Enclosure?

A successful shower installment requires cautious preparation as well as a great deal of work. In many cases, you will require to do 3 sorts of tasks: framing wall surfaces, mounting the plumbing, and also completing walls.

Prep work

First of all, you have to select the type of shower that you desire to install. It is important to identify whether the chosen shower can dealing with specific systems and also can regulate a risk-free degree of water through the central heating boiler. Most shower systems nowadays are developed to be versatile to various water pressures (such as kept warm water and also cold mains).
It is also crucial to think about the water pressure and also the preparation of the piping and also water drainage for the shower

Different Kinds Of Shower Units

Push-on Mixer: The hose pipe as well as spray parts of the push-on mixer shower system can be linked to the bathroom faucet based on your need, and the water temperature can be adjusted through the taps. Push-on mixers are cheap and exceptionally straightforward to set up. However, although the hose pipe connection is easy, it is easily dislodged. In addition, it is troublesome to adjust the temperature level.

Bath/Shower Mixer: The hose pipe and also spray of this kind of shower are incorporated with a bath mixer faucet, as well as the temperature level can be adjusted with the bath faucets. It is a really economical option and also no extra plumbing is entailed. However, the bath/shower mixers additionally suffer from troublesome temperature level control alternatives.

Guidebook Mixer: The hose and spray of a manual mixer shower unit are a part of the wall surface device as well as the cold and hot water materials are connected to a single valve The temperature level and also stress of the water are controlled via either one or a range of knobs (in much more costly showers). Although temperature control is much easier in hands-on mixer kinds, they are much more expensive than the formerly mentioned mixers. They additionally require additional plumbing of cold and hot water supply pipelines.

Thermostatic Mixer: The pipe and spray of this shower kind are a part of the wall surface unit as well as the hot and cold water materials are attached to a single shutoff below too. It is total with a built-in stabiliser to self-adjust the water temperature level and to avoid it from becoming as well warm. Among the most significant advantages of a thermostatic mixer shower kind includes hassle-free temperature control. Nevertheless, it is the most costly of the different mixer choices.

Power Shower: A power shower is a single system having an effective electric pump that can modifying both the water stress and temperature level. This type of shower can be fitted if there is water system from a cold water tank and also a warm water cyndrical tube. A power shower makes the change of both pressure and temperature level easy. On the other hand, it is unsuitable for water warmed straight by the shower or where the water is supplied by a mix central heating boiler under mains stress.

Electric Shower: An electric shower is plumbed into a mains cold water supply and also it heats up the water electrically. It is essential to keep in mind that for this shower type to be installed, the keys stress requires to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The unit permits the temperature and stress to be adjusted by means of a handle. Models with temperature stabilisers are much better as they remain unaffected by various other faucets elsewhere in use within the home. A significant downside of electrical showers is that the control knob only allows for the choice of high temperatures at much less stress, or reduced temperature levels at a greater pressure. This is problematic in the winter season when the spray is commonly weak as well as the keys water is cooler. Nevertheless, this issue is tackled in some models which are offered with a winter/summer setting.

Method

Relying on the sort of shower you wish to mount, the shower head must either be fitted in order to prevent its contact with the water in the bathroom below or the base tray, or it should have a check valve.
Before beginning, it is recommended to mark the placements of the shower head and also control, as well as to plan the pipe-work included. In addition, the drain system to remove the waste water will require to be prepared. Both placements of the cable television course and the shower switch will certainly additionally require to be taken into consideration if an immediate or electrical shower unit is being set up.
Use the instruction overview given with the shower unit to fit the shower control.Before suitable the pipelines that will supply the water to the shower system, it is necessary to remove the water supply. In order to secure the pipes, they must be provided a water-proof covering as well as additionally fitted with separating shutoffs. The pipes can after that be buried into the wall and also plastered over to neaten the general appearance.
Fit the base tray, shower head, and also installations.
Attach the primary shower control to the pipelines that will certainly be supplying the water (This might need a female screw thread adapter).
Reconnect the water system and also test the pipes for any kind of leaks, as some may need tightening.
If you are mounting an electric shower, keep in mind to turn off the power supply prior to making any electric links. When these links have actually been made (there ought to be guidance within the instruction manual), the power supply can be changed back on.

Changing Water Pressure to Fit Your Shower

The cold water tank can be raised to a higher elevation (sometimes just 150mm (6inches)) by installation a solid wooden support beneath it - possibly composed of struts and blockboards. If you pick this alternative, the major and also distribution pipelines will additionally need to be increased to meet the new height of the tank.
Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is selected, it has to be attached right into the power supply in order to operate.

Piping and Drainage

It is best to use 15mm size supply pipes, and make the go to the shower as short and straight as possible so as to keep maximum pressure and reduce heat loss. Furthermore, by reducing making use of elbows for pipeline edges, you can lower the resistance in the flow of the water. You can achieve this by flexing the pipelines instead.

Many Usual Errors

Breaching or disregarding local code limitations.

Utilizing pipes that are as well small.

Connecting copper to galvanized without making use of a brass or dielectric suitable between the two.

Not utilizing tape or pipeline substance at threaded joints.

Uneven your fixtures when mounting them.

Not setting up an air space loading for fixtures.

Cutting supply stub outs also brief to mount the shutoff valves onto after the finished wall surface remains in location.

Not effectively straightening tubes right into fittings or stop valves. (Forcing the nut onto the compression ring at an angle when the tubes is at an angle will create a leakage.).

When transforming the water back on in your house, always run the outdoors tube valve or flush your bathrooms to bleed dirt and air from the lines. This debris can cause troubles in your sink taps and also various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I came across that blog post on Simple ways to Install a Shower Cubicle on Your Own while doing a lookup on the internet. Enjoyed our blog posting? Please share it. Help somebody else check it out. We love reading our article about How to Install a One-Piece Shower Unit.

Get A Quote